MAJESTIC FINIALS FILLER I/S CORNER TIN CEILING PANEL

Browse By Category

Now In: Fillers → MAJESTIC FINIALS FILLER I/S CORNER

View Larger Image

previous | up | next

MAJESTIC FINIALS FILLER I/S CORNER

E-mail this product to a friend

An approximate 8'' high finial impression at the inside corner of a 90 degree turn, with a hammered backgroundThis classic 24" pattern with an approximate 8" finial impression across the bottom repeating approximately every 6" ]is available in over 75 dazzling finishes.

Nail-up panels adhere directly to wood substrates and are perfect for creating an authentic and seamless look to your ceiling. Historically accurate cone head nails are available in a variety of colors to match or complement any M-Boss Inc. finish.

ALUMINUM... WILL NEVER RUST!

NO SHARP EDGES

SIZED FOR ONE PERSON INSTALL

SELECT FROM ANY OF OUR DESIGNER FINISH GROUPS BELOW

POW

Authentic Tin

Click To Enlarge

SKU:	2444A
Description:	The tin ceilings of yesteryear were made from tin-plated steel. M-Boss Inc. offers tin-plated panels just like the originals. These panels provide tremendous value and are lower in cost than M-Boss Inc. aluminum and solid copper panels. However, tin-plated steel, like the original, could rust over time if exposed to water and/or humid conditions. Tin-plated steel panels also have sharp edges so it is recommended that installers wear protective gloves when handling. .
Weight:	1.8000
Price: $7.75
Quantity:

POW

Mill Finish

Click To Enlarge

SKU:	2444A
Price: $9.75
Quantity:

POW

Traditional Finishes

Click To Enlarge

SKU:	2444A
Description:	Traditional White and Clear Coated finishes allow panels to be installed without painting. The Clear Coated finish provides a shiny metallic look that will last for years. The White finish provides a clean, crisp (matte) appearance that can be used as is, or as a primer base ready for top coating with any latex paint. Mill finishes (in aluminum) and tin-plated steel, while economical, require a coating before or after installation. View a list of all our available finishes: here
Price: $14.50
Quantity:

POW

Specialty

Click To Enlarge

SKU:	2444A
Description:	These finishes are definitely beyond the ordinary. They range from classic metallic finishes such as Polished Brass and Copper to the subtly mottled and hugely popular look of Leather and Burnt Mahogany. All M-Boss Inc. Specialty colors are rich, deep, and vibrant; and provide consistent coloration from panel to panel. Specialty finishes do not require additional coating prior to, or following installation. View a list of all our available finishes: here
Price: $23.50
Quantity:

POW

Premium

Click To Enlarge

SKU:	2444A
Description:	These finishes are created using a proprietary process that results in a dramatic two-toned or variegated finish. Each Premium finish provides an almost hand-applied look that uniquely enhances each embossed pattern. Premium finishes do not require additional coating prior to, or following installation. To assure the look is just right for you, M-Boss Inc. recommends ordering full-size samples prior to placing a full order. View a list of all our available finishes: here
Price: $28.50
Quantity:

POW

Solid Copper

Click To Enlarge

SKU:	2444A
Description:	Solid copper panels provide an expensive, sophisticated look to any room where they are installed. Since these panels are shipped without a coating, these panels will age over time taking on the rich patina of aged copper. The aging process happens slowly and it can be stopped at any time during the process. Once the copper has attained the desired look and appearance, applying a clear lacquer or latex topcoat will stop the aging process. This topcoat can be purchased at any local or national paint retailer. When handling a solid copper panel it is recommended that installers wear soft cotton gloves so as not to mar the finish with oil deposits during the installation process.
Weight:	1.8000
Price: $33.00
Quantity:

POW

Artisan Finishes

Click To Enlarge

SKU:	2444A
Description:	These finishes are created and then hand applied by individual artists yielding a rich and refined custom finish that is truly unique and distinctive. Artisan finishes do not require additional coating prior to, or following installation. To assure the look is just right for you, M-Boss Inc. recommends ordering full-size samples prior to placing a full order. View a list of all our available finishes: here
Price: $49.00
Quantity: